Tarawa's new ama is out of the mold and glassed. Fitting the six struts comes next.
Saturday, June 25, 2016
Tuesday, June 21, 2016
Sunday, June 12, 2016
Wednesday, June 8, 2016
My 16' fifteen year old Tarawa is getting a new ama. The original ama was too small and caused difficulties with more than one person aboard. I had this female strip planking mold hanging in the rafters for a long time which had been used for a custom canoe project. Stripping is not the easiest way to build an ama; I still think foam or ply is faster but the mold was there so I decided to use it. No special timber, just clear 1/4" (6mm) pine planking with square edges. It will be painted so tight edge fitting is not necessary. The shape is symmetrical end to end and top to bottom.
Staples and small nails were used to hold the planks in place. Gorilla glue between the planks.
Three water tight bulkheads divide the ama into four compartments. The inside surface has been sanded and glassed with 6 oz fiberglass and West epoxy.
This 13.5' (4.1M) ama has twice the volume of the old one. Having the wind die while hiked out won't sink this one.